Hand made using a combination of waterproof cloth, cotton and double sided tape with a polyester top tape to encapsulate the lead identification markers prior to stitching the edges.
Standard lead markers are 3/16” – 4mm sharp face but other sizes can be utilised if required.
AT160 High Specification Polycoated Waterproof Cloth Tape
AT160 conforms to Def Stan 81-25
Very strong
Very good long term resistance to outdoor exposure
Good abrasion and puncture resistance
Good water resistance
Writable surface
Matt finish
Technical Specs
Thickness – 0.1inch / 0.33mm
Breaking Load - 85 N/cm
Elongation - 8%
Adhesion To Steel - 4.0 N/cm
Adhesion To Self - 2.2 N/cm
Service Temp -58F to 176F / -50°C to +80°C
|